Base |
The BaseSerialLaserController type exposes the following members.
Methods| Name | Description | |
|---|---|---|
 | AppendMessage | Adds the given string to the list of received messages, with a preceding timestamp in the manner of the RAYGUIDE log data. The list is a ring buffer with at most 200 entries and shown in the GUI. |
 | ArmLaser(Boolean) |
Arm or disarm the laser.
(Inherited from BaseLaserController) |
| ArmLaser(Boolean, Int32, IOPortCondition, NullableGuid) |
Arm or disarm the laser.
(Inherited from BaseLaserController) |
| ChangeBeamProfileT |
Selects a beam profile.
(Inherited from BaseLaserController) |
| CheckControllerFeature |
Checks whether the automation feature is supported.
(Inherited from BaseLaserController) |
| CheckOnLaserReadySerial | Checks if the laser is ready by retrieving its state by the RS-232 connection. |
| ClearDelegates |
Removes all laser delegates.
(Inherited from BaseLaserController) |
| Connect |
Connects to the device.
(Inherited from BaseLaserController) |
| ConnectSerialPort | Connects with the serial port. |
| CreateDefaultProfile |
Creates the default laser profile for this device.
(Inherited from BaseLaserController) |
| Disconnect |
Disconnects from the device.
(Inherited from BaseLaserController) |
| Dispose | (Inherited from BasePlugin) |
| Dispose(Boolean) | (Overrides BaseDeviceControllerDispose(Boolean)) |
| DisposeUI |
Disposes the given setting view.
(Inherited from BaseDeviceController) |
| DoConnect |
Performs the connection process.
(Overrides BaseLaserControllerDoConnect) |
| DoDisconnect |
Stops the message handler thread and closes the serial port.
(Overrides BaseLaserControllerDoDisconnect) |
| DoDisposeUI | (Inherited from BasePlugin) |
| DoDoShowUI | (Inherited from BaseLaserController) |
| DoDoShowUICallback | (Inherited from BaseLaserController) |
| DoShowUI | (Inherited from BaseLaserController) |
| DoShowUICallback | (Inherited from BaseLaserController) |
| EnablePointer(Boolean) |
Enable or disable the pointer.
(Inherited from BaseLaserController) |
| EnablePointer(Boolean, Int32) |
Enable or disable the pointer.
(Inherited from BaseLaserController) |
| EnablePointer(Boolean, IOPortCondition, NullableGuid) |
Enable or disable the pointer.
(Inherited from BaseLaserController) |
| EnablePointer(Boolean, Int32, IOPortCondition, NullableGuid) |
Enable or disable the pointer.
(Inherited from BaseLaserController) |
| GetDeviceStatusRepresentation | (Overrides BaseLaserControllerGetDeviceStatusRepresentation) |
| GetLaserArmed |
Returns true if the laser is armed.
(Inherited from BaseLaserController) |
| GetPointerEnabled |
Returns true if the laser is enabled.
(Inherited from BaseLaserController) |
| GetPowerScaleMultiplier |
Gets the power scale multiplier of the laser.
(Inherited from BaseLaserController) |
| GetUsedScanController | Retrieves the scan controller associated with this laser. |
| HandleExternalDeviceRequestAsync |
Handles a chained request for a given list of features.
(Inherited from BaseDeviceController) |
 | HandleSerialMessagesThread(Object) | The message handler for incoming messages from the serial port. |
| HandleSerialMessagesThread(Thread) | The concrete message handler is to be implemented by the derived class. |
| Initialize |
Plug-in specific initialization can be done here if necessary.
(Inherited from BasePlugin) |
| InvokeArmedChanged | (Inherited from BaseLaserController) |
| InvokeCommunicationError | Invokes communication error event. |
| InvokeCommunicationOk | Invokes communication OK event. |
| InvokeConnected |
Invokes Connected event.
(Inherited from BaseDeviceController) |
| InvokeDisconnected |
Invokes Disconnected event.
(Inherited from BaseDeviceController) |
| InvokeHasPointerChanged |
Invoke HasPointerChanged.
(Inherited from BaseLaserController) |
| InvokeInitialized |
Invokes Initialized event.
(Inherited from BaseDeviceController) |
| InvokePointerEnabledChanged | (Inherited from BaseLaserController) |
| InvokeSerialPortClosed | Invokes the serial port closed event. |
| InvokeSerialPortOpened | Invokes the serial port opened event. |
| InvokeStatusChanged |
Invokes StatusChanged event.
(Inherited from BaseDeviceController) |
| InvokeStillUnused | Invokes still unused event. |
| InvokeUninitialized | Invokes the Uninitialized event. |
| InvokeUsed | Invokes used event. |
| IsAnalog |
Returns whether the laser’s power is controlled via an analog voltage.
(Inherited from BaseLaserController) |
| NormalizePowerValue |
Convert power value from a device specific value to a percentage.
(Inherited from BaseLaserController) |
| OnDevicesChanged | (Inherited from BaseDeviceController) |
| OnSerialPortConnected | In this method class dependent actions can be done when the serial port could be opened, e. g. getting the laser state. |
| OnSerialPortDisconnected | In this method class dependent actions can be done when the serial port is disconnected. |
| ReadLaserStatus |
Reads the status of the laser. Updates IsInAlarm.
(Inherited from BaseLaserController) |
| SetLaserConfig |
Send the laser configuration to the card
(Inherited from BaseLaserController) |
| SetOpticalPulseWidthT |
Sets the optical pulse width.
(Inherited from BaseLaserController) |
| SetPower |
Sets the laser power.
(Inherited from BaseLaserController) |
| SetPowerCalibrationFile |
Sets the power calibration file (*.pcl).
(Inherited from BaseLaserController) |
| SetPowerCorrectionFile |
Sets the power correction file (*.pc3).
(Inherited from BaseLaserController) |
| SetPowerScaleMultiplier |
Sets the PowerScaleMultiplier of the laser.
(Inherited from BaseLaserController) |
| SetPulseRepetition |
Sets the PRR (Pulse Repetition Rate).
(Inherited from BaseLaserController) |
| SetPulseWidth |
Sets the pulse width.
(Inherited from BaseLaserController) |
| ShowUI |
Shows the specific UI embedded in the plugin instance.
(Inherited from BaseDeviceController) |
| ShowUICallback |
Invokes the callback that can be used when the ShowUI method is done.
(Inherited from BaseDeviceController) |
| ShowUICancelCallback |
Invokes the callback that can be used when the ShowUI method is done and the user pressed the cancel button
(Inherited from BasePlugin) |
| ToString | (Inherited from BasePlugin) |
| TurnLaserOff |
Deactivate the laser
(Inherited from BaseLaserController) |
| TurnLaserOn |
Activates the laser
(Inherited from BaseLaserController) |
| UpdateLaserStateGui | Updates the traffic lights in the settings dialog, the menu bar and the Configure devices dialog. |
| UsePowerCorrectionValue |
TODO: Use the power correction file.
(Inherited from BaseLaserController) |
| ValidateDouble |
Validates whether a value is within a range.
(Inherited from BaseLaserController) |
| ValidateDutyCycle |
Validates a given laser duty cycle.
(Inherited from BaseLaserController) |
| ValidateFrequency |
Validates a given laser PRR within its allowable range.
(Inherited from BaseLaserController) |
| ValidatePower |
Validates a given laser power within its allowable range.
(Inherited from BaseLaserController) |
| ValidateProperties |
Validate property values.
(Overrides BaseLaserControllerValidateProperties) |
| ValidateRange |
Validates whether a given range falls within a boundary.
(Inherited from BaseLaserController) |
See Also