Dalsa |
The DalsaCamera type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | ActivatedChainableFeatures |
Gets the activated chainable features.
(Inherited from BaseDeviceController) |
| BrightImageFfcFileName |
The path and file name of the bright image for flat field correction.
(Inherited from BasePluginCamera) |
| CalibrationDataSet |
The set of all defined calibrations. A user can add a new
calibration for a specific focus level. The current level is
stored in property FocusLevel.
(Inherited from BasePluginCamera) |
| CalibrationInfo | (Inherited from BasePluginCamera) |
| CalibrationInfoBackground | (Inherited from BasePluginCamera) |
| CameraID |
The ID to identify the camera in a list of available cameras.
(Inherited from BasePluginCamera) |
| CenterOffsetWorld |
The offset in x and y direction needed to let the camera view at
the origin when the scan head points at the origin.
(Inherited from BasePluginCamera) |
 | ConfigurationManager | (Inherited from BasePlugin) |
| DarkImageFfcFileName |
The path and file name of the dark image for flat field correction.
(Inherited from BasePluginCamera) |
| DownscaleFactor |
A taken picture is downscaled by this factor [0.01 .. 1.0] before
the Bitmap is returned.
(Inherited from BasePluginCamera) |
| DriverVersionMismatchWarning | (Inherited from BasePluginCamera) |
| EnableChainableFeature |
Gets or sets the flag to enable chainable features.
(Inherited from BaseDeviceController) |
| ExposureTime |
The time a single frame will be exposed in ms.
(Inherited from BasePluginCamera) |
| FieldHeightPixel |
The height of the camera image in pixel.
(Inherited from BasePluginCamera) |
| FieldHeightWorld |
The height of the area (camera image) in the scan field the camera looks on in
micrometers when visible light is used; changes when the pixel height of the
camera is changed.
(Inherited from BasePluginCamera) |
| FieldHeightWorldFromCalib |
The height of the area (camera image) in the scan field the camera looks on in
micrometers as measured during calibration using the full camera resolution.
In case of a z-range there will be two values, one for the upper and
one for the lower working distance.
(Inherited from BasePluginCamera) |
| FieldWidthPixel |
The width of the camera image in pixel.
(Inherited from BasePluginCamera) |
| FieldWidthWorld |
The current width of the area (camera image) in the scan field the camera looks on in
micrometers when visible light is used; changes when the pixel width of the
camera is changed.
(Inherited from BasePluginCamera) |
| FieldWidthWorldFromCalib |
The width of the area (camera image) in the scan field the camera looks on in
micrometers as measured during calibration using the full camera resolution.
In case of a z-range there will be two values, one for the upper and
one for the lower working distance.
(Inherited from BasePluginCamera) |
| Gain |
The current gain value set in the camera.
(Inherited from BasePluginCamera) |
| HasConnectedStatus | (Overrides BaseDeviceControllerHasConnectedStatus) |
| HasScanHeadLensMounted |
Should be set to true if a lens is mounted to the scan head. The information
is needed when using Click&Teach in the distortion correction process to cut the
tiles accordingly.
(Inherited from BasePluginCamera) |
| IsAutoBrightness |
If true the brightness may be set automatically by the camera.
Depends on if auto gain and/or auto exposure is set additionally.
Only used if the parameter is available in the camera settings.
(Inherited from BasePluginCamera) |
| IsAutoConnect | (Inherited from BaseDeviceController) |
| IsAutoExposure |
If true the exposure time is set automatically by the camera.
(Inherited from BasePluginCamera) |
| IsAutoGain |
If true the gain is set automatically by the camera.
(Inherited from BasePluginCamera) |
| IsAveragePixels |
Flag to indicate if - in case of binning - the pixels will be
averaged.
(Inherited from BasePluginCamera) |
| IsCombinePixels |
Flag to indicate if binning is active.
(Inherited from BasePluginCamera) |
| IsConnected | (Inherited from BasePluginCamera) |
| IsEmulator |
Flag to indicate if this camera is an emulated one.
(Inherited from BasePluginCamera) |
| IsFlatFieldCorrection |
If true, flat field correction will be done.
(Inherited from BasePluginCamera) |
| IsHardwareTrigger |
If true, the camera is triggered by a hardware signal instead via software.
(Inherited from BasePluginCamera) |
| IsHardwareTriggerWait |
If true, the camera waits for a hardware pulse signaling that image
transfer is done instead for software event.
(Inherited from BasePluginCamera) |
| IsInitialized |
Is true if the device is initialized.
(Inherited from BaseDeviceController) |
| IsManualTriggerLoop |
If true, the camera will be triggered by TakePictureMat by using
a WritePortAutomation object. Otherwise the camera will be
triggered by Click and Teach after setting the mirror positions using
BaseScanController.GoToAndTrigger().
(Inherited from BasePluginCamera) |
| IsToFlip |
If true the camera picture will be flipped horizontally.
(Inherited from BasePluginCamera) |
| LogDirectory |
The directory of the log file.
(Inherited from BasePlugin) |
| Logger |
The common logger.
(Inherited from BasePlugin) |
| LowerRightCornerCalibrationMarkRatio |
The position of the marked lower right corner in the wave length
calibration stage; given as ratio of the field width.
(Inherited from BasePluginCamera) |
| LowerRightCornerWorld |
When calibrating the wave length correction: The lower right corner
of the calibrating rectangle where it should be in world
coordinates in micrometers.
(Inherited from BasePluginCamera) |
| PenNumber |
The pen used when creating the calibration jobs.
(Inherited from BasePluginCamera) |
| PluginMetadata |
The metadata of the plugin instances. If the concrete class inherits from the BasePluginSetup interface, the metadata of the BasePluginSetup will be prefilled.
(Inherited from BasePlugin) |
| RectificationCropFactor |
A tile will be cropped by this percentage if a F-Theta lens is mounted
and equalization is activated.
(Inherited from BasePluginCamera) |
| ScanFieldSizeWorld |
The size of the scan field in world coordinates the calibration is done for.
(Inherited from BasePluginCamera) |
| ScanHead |
The scan head the camera is attached to in on-axis setups or
null if it is an off-axis camera.
(Inherited from BaseCamera) |
| ScanHeadPosition |
The current scan head position in world coordinates, i. e. the point
where the camera currently looks at.
(Inherited from BasePluginCamera) |
| ScanHeadShortLabel |
The short label of the scan head the calibration is done for.
(Inherited from BasePluginCamera) |
| SelectedFocusLevel |
The last selected focus level in the GUI in micrometers.
(Inherited from BasePluginCamera) |
| SerialNumber |
Serial number of the device.
(Inherited from BaseDeviceController) |
| StandardMeasure |
The standard distance to be used when calibrating the camera in micrometers.
(Inherited from BasePluginCamera) |
| Statuses | (Inherited from BaseDeviceController) |
| SupportedChainableFeatureMap |
The map of chainable feature types supported by this device. The value indicates whether the feature is a transmitter or a receiver.
(Inherited from BaseDeviceController) |
| UpperLeftCornerCalibrationMarkRatio |
The position of the marked upper left corner in the wave length
calibration stage; given as ratio of the field width.
(Inherited from BasePluginCamera) |
| UpperLeftCornerWorld |
When calibrating the wave length correction: The upper left corner
of the calibrating rectangle where it should be in world
coordinates in micrometers.
(Inherited from BasePluginCamera) |
| WaveLengthScaleFactor |
The scale factor needed to correct the deviation between the laser
wave length and the visible light's wave length recorded by the camera.
This is the value retrieved from the calibration; field rotation is not
taken into account.
(Inherited from BasePluginCamera) |
| WorkspaceConfiguration |
The workspace configuration which is used during calibration.
(Inherited from BaseCamera) |
See Also