Trace |
The TraceBufferConfig0 type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | AbortMark | If enabled then every change of the AbortMark signal (triggered by software or using the external pin) will trigger a TraceEvent. |
| Dac0 | If enabled then every change on the Dac0 will trigger a TraceEvent. |
| Dac1 | If enabled then every change on the Dac1 will trigger a TraceEvent. |
| Fps | If enabled then every change of the Fps signal will trigger a TraceEvent. |
| Gate | If enabled then every change of the Gate signal will trigger a TraceEvent. |
| LaserPower1 | If enabled then the output power with a resolution of 1 bit will trigger a TraceEvent. |
| LaserPower16 | If enabled then the output power with a resolution of 16 bit will trigger a TraceEvent. |
| LaserPower2 | If enabled then the output power with a resolution of 2 bit will trigger a TraceEvent. |
| LaserPower4 | If enabled then the output power with a resolution of 4 bit will trigger a TraceEvent. |
| LaserPower8 | If enabled then the output power with a resolution of 8 bit will trigger a TraceEvent. |
| LaserTriggered | If enabled then every change of the 'LaserTriggered' signal will trigger a TraceEvent. |
| Lm | If enabled then every change of the LM signal will trigger a TraceEvent. |
| PortA | If enabled then changes occurring on PortA will trigger a TraceEvent. |
| PortB | If enabled then changes occurring on PortB will trigger a TraceEvent. |
| PortC | If enabled then changes occurring on PortC will trigger a TraceEvent. |
| PortDHigh | If enabled then changes occurring on the upper bits (D23-16) of PortD will trigger a TraceEvent. |
| PortDLow | If enabled then changes occurring on the lower bits (D15-0) of PortD will trigger a TraceEvent. |
| PortEHigh | If enabled then changes occurring on the upper bits (D23-16) of PortE will trigger a TraceEvent. |
| PortELow | If enabled then changes occurring on the lower bits (D15-0) of PortE will trigger a TraceEvent. |
| PortLaserIn | If enabled then changes occurring on any bits of LaserIn will trigger a TraceEvent. |
| PortLaserIn0 | If enabled then changes occurring on bit 0 of LaserIn will trigger a TraceEvent. |
| PortLaserIn1 | If enabled then changes occurring on bit 1 of LaserIn will trigger a TraceEvent. |
| PortLaserOut | If enabled then changes occurring on any bits of LaserOut will trigger a TraceEvent. |
| PortLaserOut0 | If enabled then changes occurring on bit 0 of LaserOut will trigger a TraceEvent. |
| PortLaserOut1 | If enabled then changes occurring on bit 1 of LaserOut will trigger a TraceEvent. |
| PortLaserOut2 | If enabled then changes occurring on bit 2 of LaserOut will trigger a TraceEvent. |
| StartMark | If enabled then every change of the StartMark signal (triggered by software or using the external pin) will trigger a TraceEvent. |
See Also