J3 incorporates 25 digital signals to the SP-ICE-3 Card
Disconnect power from the SP-ICE-3 Card before connecting J3 to X402 GpioD of the SP-ICE-3 Card with the supplied cable.
J3 Pinout
Name | Signal | Pin |
|---|
PD.0 (/SPI_SYNC) | LVCMOS33_In | 1 | | GND | 3 | PD.3 (/SPI_MISO) | LVCMOS33_Out | 5 | PD.4 | LVCMOS33_Out | 7 | | GND | 9 | PD.7 (PRO_START) | LVCMOS33_In | 11 | PD.8 (PRO_B1) | LVCMOS33_In | 13 | | 3.3V | 15 | PD.11 (PRO_B4) | LVCMOS33_In | 17 | PD.12 (PRO_B5) | LVCMOS33_In | 19 | | GND | 21 | PD.15 (SYSTEM_ON) | LVCMOS33_In | 23 | PD.16 (Profile_Enable) | LVCMOS33_In | 25 | | GND | 27 | PD.19 (Clear_Error) | LVCMOS33_In | 29 | PD.20 (Aiming_Laser_Enable) | LVCMOS33_In | 31 | | 3.3V | 33 | PD.23 (GATE_IN) | LVCMOS33_In | 35 | | GND | 37 | | 12V | 39 |
| Top View |
|---|
|
| Pin | Signal | Name |
|---|
2 | LVCMOS33_In | PD.1 (/SPI_SCLK) | 4 | LVCMOS33_In | PD.2 (/SPI_MOSI) | 6 | 3.3V | | 8 | LVCMOS33_Out | PD.5 | 10 | LVCMOS33_Out | PD.6 | 12 | GND | | 14 | LVCMOS33_In | PD.9 (PRO_B2) | 16 | LVCMOS33_In | PD.10 (PRO_B3) | 18 | GND | | 20 | LVCMOS33_In | PD.13 (PRO_B6) | 22 | LVCMOS33_In | PD.14 (PRO_B7) | 24 | 3.3V | | 26 | LVCMOS33_Out | PD.17 (Error) | 28 | LVCMOS33_In | PD.18 (Exten_IN) | 30 | GND | | 32 | LVCMOS33_In | PD.21 (External_Control_Enable) | 34 | LVCMOS33_In | PD.22 (24V_Enable) | 36 | LVCMOS33_InOut | PD.24 (OneWireEEPROM) | 38 | GND | | 40 | 12V | |
|
Electrical Characteristic LVCMOS33
Symbol | Parameter | Condition | Min | Typ | Max | Unit |
|---|
| |
Iout = -4mA
| 2.6 | 3.3 | | V |
| |
Iout = 4mA
| | | 0.4 | V |
VIH | HIGH Level Input Voltage | | 2.0 | | 3.6 | V |
VIL | LOW Level Input Voltage | | -0.3 | | 0.8 | V |
Vpullup | Pull Up Voltage | | | 3.3 | | V |
Ipullup | Pull-Up Current |
0 < Vin < 0.7 * VIO | -30 | | -309 | μA |
