6.2.2 Connecting a Laser directly to the SP-ICE-3 Card

Many types of laser require only a few control signals, and can thus can be connected directly to the SP-ICE-3 Card relatively easily.

In the following sections we present some examples of wiring schemes which have been used to connect various lasers to the card.

Caution
RAYLASE GmbH makes no warranty concerning the completeness, reliability, or accuracy of this information. Any action you take on the basis of the information in this document is strictly at your own risk, and RAYLASE GmbH will not assume responsibility for any damage to property or injury to persons. RAYLASE GmbH is not responsible for laser safety: appropriate measures must be taken by the user. Please see also section 1.4.1 Laser Safety

Caution

RAYLASE GmbH makes no warranty concerning the completeness, reliability, or accuracy of this information.
Any action you take on the basis of the information in this document is strictly at your own risk, and RAYLASE GmbH will not assume responsibility for any damage to property or injury to persons.
RAYLASE GmbH is not responsible for laser safety: appropriate measures must be taken by the user.
Please see also section 1.4.1 Laser Safety

Note
Although you may be able to use one or more of these schemes as a reference for your particular laser and application, please be aware that RAYLASE GmbH can neither guarantee success, nor provide individual wiring diagrams for every possible use-case or application. In particular, RAYLASE GmbH does not guarantee the accuracy or present validity of any OEM data shown in the following sections.